This portable monitor unit connects easily to any high or low pressure compressed air breathing source and monitors air for CO content.

Apparatus can be used with any NIOSH particulate or gas/vapor respirator with a particulate prefilter to test face-to-respirator seal.

Perform qualitative fit tests on air-purifying respirators with a Smoke Test Kit.

Apparatus can be used with any NIOSH particulate or gas/vapor respirator with a particulate prefilter to test face-to-respirator seal.

Apparatus can be used with any NIOSH particulate or gas/vapor respirator with a particulate prefilter to test face-to-respirator seal.

Isoamyl acetate (banana oil) is the oldest method of testing respirator fit. Its strong, identifiable odor will be recognized if a respirator doesn't fit correctly.

The Bitrex Fit Test Kit tests all disposable and reusable dust and mist respirators for OSHA compliance. Shown to be safer and equally as accurate as saccharin tests.

Before you choose your 3M™ Belt-Mounted PAPR Assembly, you should choose either the lightweight, 40" H-115 Breathing Tube, the 36" GVP-122 Reusable Breathing Tube, or the GVP-123 Breathing Tube (for use with the 3M™ Full Facepiece 7800S).

Twist-lock connector makes connecting quick and easy.

The Breathe Easy Respiratory System offers efficient air-purifying protection against gases, vapors and particulates. The 5 Unit System allows for customized parts selection. Simply choose a helmet, a breathing tube, a turbo assembly, a cartridge/filter, and a battery charger.

The Breathe Easy Respiratory System offers efficient air-purifying protection against gases, vapors and particulates. The 5 Unit System allows for customized parts selection. Simply choose a helmet, a breathing tube, a turbo assembly, a cartridge/filter, and a battery charger.

Primair Series Headgear is loose-fitting and adjustable for a secure fit.

Keep your Compact Air PAPR assembly in good working condition and avoid the costs of replacing an entire PAPR system.

The 3M Belt-Mounted Powered Air Purifying Respirator takes contaminated air and uses a motorized blower to force it through a filter/cartridge assembly, purifying the air and delivering it to the hood. The blower runs on batteries and is mounted to the user's belt, giving that worker greater mobility and the ability to operate in a wide variety of environments. To assemble your own custom-designed system, simply follow these four steps: Choose a Head Assembly; Choose a Breathing Tube; Choose a PAPR Assembly; and Choose a Cartridge/Filter.

Keep your Compact Air PAPR assembly in good working condition and avoid the costs of replacing an entire PAPR system.

Primair Series Headgear is loose-fitting and adjustable for a secure fit.

Air-Mate Hoods and Head Covers are made of durable, economical DuPont Tyvek QC, that has been "quality coated" with 1.25-mil polyethylene for reduced permeability to moisture, vapor and air.

The 3M full facepiece 6000DIN Series provides versatile protection against various harmful gases, vapors, and particulates.

The Quick Charger is used to charge PA1 or PA2 Blowers.

An Intrinsically Safe Battery is ideal when using a 3M™ Breathe Easy™ Belt-Mounted PAPR around hazardous flammable materials.

The Standard Charger is used to charge PA1 or PA2 Blowers.

Recharge the NiCad battery pack on your Air-Mate PAPR with one of 3M’s SmartCharger Battery Chargers.

The 3M™ Smart Battery Charger BC-210 is intended to charge the 3M™ Battery Pack BP-15 only with the 3M™ Breathe Easy™ Belt-Mounted Turbo Powered Air Purifying Respirator (PAPR) Unit.

The Breathe Easy Respiratory System offers efficient air-purifying protection against gases, vapors and particulates. The 5 Unit System allows for customized parts selection. Simply choose a helmet, a breathing tube, a turbo assembly, a cartridge/filter, and a battery charger.

Comfortable padded belt accommodates a PA1 or PA2 Blower.

The PA20 Series Powered Air Purifying Respirator lets you choose a PAPR that provides ideal protection for a specific work environment.

The OptimAir MM2K Powered Air-Purifying Respirator (PAPR) is designed for work in abatement, nuclear, lead, and other hazardous particulate environments. The PAPR filters particulates and provides a constant flow of respirable air to the Ultravue® or Ultra Elite® Facepiece.

Constant air flow to either a full Ultravue® facepiece provides protection from particulates, toxic gases and vapors, or a combination of these hazards.

Gasketed high-efficiency filter fits securely inside the PA20 Blower.

The Breathe Easy Respiratory System offers efficient air-purifying protection against gases, vapors and particulates. The 5 Unit System allows for customized parts selection. Simply choose a helmet, a breathing tube, a turbo assembly, a cartridge/filter, and a battery charger.

A full selection of Filters, Cartridges and Filter/Cartridge Combinations ensures protection from specific workplace hazards.

The 3M Belt-Mounted Powered Air Purifying Respirator takes contaminated air and uses a motorized blower to force it through a filter/cartridge assembly, purifying the air and delivering it to the hood.

A smooth finish, gasketed design and downward sloping shape give the PA20 Blower a “decon-friendly” housing.

The Compact Air provides a high level of respiratory protection in a convenient and lightweight belt-mounted design. NIOSH approved.

The GVP-1 Belt-Mounted Assembly includes a motor blower, battery pack, charger, flow meter, power cord, blower plugs, and web belt.

The GVP-1 Belt-Mounted PAPR Assembly uses the GVP-100 PAPR Motor Blower, which is designed for use with certain 3M helmets, hoods, loose-fitting headgear, tight-fitting facepieces and appropriate cartridges and filters to create NIOSH-approved respirator systems.

The Breathe Easy Respiratory System offers efficient air-purifying protection against gases, vapors and particulates. The 5 Unit System allows for customized parts selection. Simply choose a helmet, a breathing tube, a turbo assembly, a cartridge/filter, and a battery charger.

Convenient cleaning kit and storage for full face and half mask respirators. Kit meets OSHA recommendations (29 CFR 1910.134 Appendix B). Will not deteriorate rubber components on respirator pieces.

A convenient and effective way to clean respirators. 100 individually packaged, premoistened wipes in a convenient dispenser box for wall mounting or desktop use.

These 8 x 11" individually foil-packaged towelettes are perfect for big cleaning jobs, such as full face and supplied air respirators.

The 5 x 8" individually packaged towelettes are ideal for wiping respirators clean between complete cleanings, extending time of uninterrupted use.

The Towelette Dispenser conveniently holdsone dispenser box of 5 x 8” towelettes.

Convenient cleaning kit and storage for full face and half mask respirators. Kit meets OSHA recommendations (29 CFR 1910.134 Appendix B). Will not deteriorate rubber components on respirator pieces.

Provides the highest rated filter efficiency against solid and non-oil liquid aerosols in a comfortable, maintenance-free design.

Willson has taken its popular SAF-T-FIT particulate respirator and made it better than ever. The increased inner volume of the new design makes the respirator feel less oppressive, and makes speech easier while wearing it. The resulting increase in surface area improves performance and reduces breathing resistance.

The 2315 N99 Premium Particulate Respirator may be used for most welding applications. The exclusive Dura-Mesh® resists collapsing during regular use and even under hot and humid conditions.

The 8246 provides relief from nuisance levels (below OSHA PEL) of acid gases like hydrogen fluoride, sulfur dioxide and chlorine, as well as solid and liquid particles including those containing oil.

The 8247 has a carbon layer that provides relief from nuisance-level organic vapors with concentrations below OSHA PEL.

The 8240 is designed to provide at least 95% filter efficiency against both oil and non-oil particulate contaminants, making it ideal for use in applications like grinding, sanding and machining.

The 8293's P rating and 100 class filtration are ideal for use in a variety of non-oil and oil aerosol applications, including welding, pharmaceutical manufacturing, lead abatement and tasks involving OSHA substance-specific regulated particles.